Vented Subwoofer Box Update

I made some good progress. I was able to secure the pieces of the port. That was a little harder than I was planning, but I got it done. I rounded all the edges to help reduce port noise. I also made the port with 42 square inches of port area. I made the port way bigger than it really needed to be because my last box had severe port noise. This box will have next to none hopefully. It is tuned to 33-34 hz so it should hit nice and low. I got the top on too. The internal volume is 1.8 cubic ft. and the total volume with the port included is 3 cubes. I plan on putting some polyfill in it and sealing up a couple places before I begin to wrap it. I might put some LED's inside so you can see a glow from the port. It might be a little cheesy so I haven't quite decided. Here's the pics of the progress.